3 in 1 feeder 500 free. Return Instructions
Looking for:
STALL GRAZER 3-IN-1 FEEDER - Corner & Wall - Cashmans.Water footprint of crop and animal products: a comparison |
One moment, please
Your message must be between , characters! Please check your E-mail! We will call you back soon! Clicking on the touch screen feeding pull switch, forcing the material to advance to the handpiece, and controlling the material frame to rotate forward.
When the material is close to the machine head, the feeding feed arm and the pressing arm are raised, and the material is pressed by the pressing arm. Relax the feed cylinder and level the cylinder to allow material to enter the machine head. Note: The pressure arm should be kept in an automatic state, otherwise bulk material will appear.
Clamp the feed cylinder, level the cylinder, relax the feed cylinder, make the material pass the machine head, and then adjust the leveling height to clamp the feed cylinder.
Feed roller pressure adjustment: By adjusting the pressure regulating valve, the upper roller and the lower roller can be prevented from slipping, and the air pressure is controlled at the same time to avoid crushing the material, causing indentation or slipping.
Material Offset: If the material begins to shift incorrectly, you should immediately confirm that the mold is parallel and placed in the center of the table. The material is at right angles and centered into the leveler. This operation can be measured by the gage. If there is a slight irregularity, it can be slowly positioned by adjusting the left and right positions of the baffle wheel.
Material leveling adjustment: material leveling principle: The leveling drum is arranged in a zigzag pattern. If the flattening roller on the inlet side is lowered, the material is bent along the drum. If the flattening roller on the outlet side is pressed too much, the material Then bend down.
Generally, the inlet side is lowered to a position where the upper and lower flattening roll gaps are 1 to 1.
The specific operation method can be found in the man-machine interface operation mode. After completion, it can enter normal production. Straigtening performance:. After-sales Service Provided: Field maintenance and repair service, Engineers available to service machinery overseas.
E-Mail Sitemap. Leave a Message We will call you back soon! More information facilitates better communication. Product Details:. Detailed Product Description. Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
Full-Service:Actively cooperate with customers to deal with problems in equipment using. Tag: coil handling equipment , coil feeder straightener , 3 in 1 feeder. Contact Details. Contact Person: Calin Deng Tel: Send your inquiry directly to us Contact Now. Best Products. Other Products. E-Mail Sitemap Mobile Site.
All Rights Reserved.
Comments
Post a Comment